A PRETTY TOILETRY HOLDER? OR..., A STATIONARY HOLDER?

Hello, everyone!  It's Audrey again -- thanks to Sheila having me back!

Several weeks ago, I went on an out-of -state visit with a friend and we stopped at a hotel along the way for some much needed rest.  While there, in the bathroom of our room, I was inspired for this project when I paid attention to how the towels were fan-folded and then focused on the fancy combination holder for the coffee/tea; I guess inspiration can come from anywhere...lol!  Anyway, I combined the idea of the folded towels and the beverage holder, and here's what I came up with:

It's a toiletry holder (but it can also be substituted for a stationary holder and the back can hold pens/pencils)!!!  For mine here,I've added a bar of soap, a towel, and -- in the back -- a small bottle of bubble bath.  Here's a picture of the back:

Supplies needed to make this project::

• 1 - 6" x 12" sheet of  your preferred cardstock
• 1 - 8" x 6" sheet of same or coordinating cardstock
• 1 - 6" x 5" piece of chipboard (with enough coordinating paper to cover the roll)
• 1 - toilet tissue roll cut down to 3"
• 1 - 6" x 4.50" piece of heavy chipboard (with enough matching paper to cover your chipboard)
• Strong adhesive of your choice (I used Crafter's Pick "The Ultimate")

Starting with making the soap holder:  With the 6"x12" sheet of paper, 12" side across the top of scoreboard, score at::  .75", 1.50", 2.25", 3", 3.75", 4.50", 5.25", 6",  and  6.75" (this is every 3/4th inches); the final score will be at 8":

With the first fold being a valley fold, start mountain and valley folding up to and including the 6.75" scoreline (do not fold the 8" scoreline yet).  Once all the folds are done, run glue along the bottom of the first bottom valley  fold:

With a finger in the middle of the folds only, fold and bring the inside ends together (see picture below);  then glue to create a seamed fan-fold:

When the ends have been glued together, the seamed fold will protrude on the inside so, in order for your soap to fit easily into it's holder, cut away as much access paper as possible:

Now, add glue to bottom of the 6" scoreline area and glue this down to base of the cardstock aligned with the 6.75" scoreline:

Next fold the fan-fold up into an upright position and fold the 8" score line towards you (valley fold) to form the soap holder.  It should look like this:

Put the soap holder aside for a moment and move on to the towel holder.

For the towel holder the 8"x6" cardstock is scored only once at 5", with the 8" side across the top of the scoreboard.  Fold at the 5" scoreline  and set this aside for now also.

Now, before the 2 holders are put together the back wall of the soap holder first needs to be secured so that it will stand in place on it's own (otherwise the back wall will be floppy because the cardstock isn't heavy enough to support itself).  To do this, take the 6"x8" chipboard and with the 6" side across the top of the scoreboard, score at 2" and fold.  Next, grab the soap holder;  take the chipboard and align it with the middle back wall of the soap holder; slide the  2" end of the chipboard beneath the back wall of the soap holder then glue the bottoms together.  The remaining end of the chipboard is then glued to the back wall of the holder (see picture below for chipboard placement).  Once the chipboard is glued in place, take the towel holder and glue the 3" scored end to the bottom of the soap holder.  Your holder will look like this:

Finally, cover the remaining 6" x 4.50" piece of chipboard (this will be the base for the entire holder) and the tissue roll with coordinating cardstock.  Glue the covered chipboard to the bottom of the holders aligning the front ends.  The remaining inches will extend from the back of the holder (see picture below).  This base will provide additional stability and security to your holder.  Now take your tissue roll and glue this to the back wall of your towel holder and to the bottom of the covered chipboard base:

Now the holder is done, all that's left is to decorate and embellish any way you'd like.

For my holder, I added a fan-fold to the top of the tissue-roll  holder holding the small bottle of bubble bath to complement the fan-fold on the front of the holder; added some Stickles around the edges; inserted my toiletries, added a metal leaf to the front and flat-backed marbles for feet.  The holder is all done!!!

Remember the useful idea I mentioned earlier that this holder can double as a stationary holder; swap out the soap for envelopes, stationary for the towel, and drop pencils/pens in the tissue-roll holder on the back!!!  Or maybe you can think of something else -- let me know!!!  Have fun with it!!!

Thanks so much for stopping by, and I hope you like my little project!