October 20, 2012

Digital Scrapping....and a gift!

Hi, all! This is Jeannie from Nonnasscraps. I am thrilled to be back with you here at Sassy Lady! Thanks for letting me share!

For my son's birthday I decided to give him "scrapbook" of his two children. He is, however, not into bulky books or fluff. I saw a stand at Michael's that held 8x8" scrapbook pages and allowed the pages to be used as art. A 50% off coupon and it was mine. But here is what is his:



The title page says, "A Child is the Greatest Joy, the Ultimate Blessing." It is so true of these two babies. The stand holds multiple pages, so it can grow over time. Pages can be used back and front and flip over the rings to the back (so the art can change!) Here are two more pages:

I Scrapbook for MacBook Pro
(digital scrapbooking software)
Photos of choice
Digital papers of choice
Digital Elements of Choice
Photo/Scrapbook Stand (Michael's)
mat photo paper
Home printer

  1. Assemble each page in the software.
  2. Print at 8x8" size.
  3. Trim to size.
  4. Embellish if desired.
  5. Add to sleeve of stand.
  6. Display.
I can think of numerous ways to use a stand like this. Celebrate a wedding, new baby or anniversary. How about displaying a favored trip? What can you think of? 





October 19, 2012

Halloween Paper Cone Wreaths


 
Hi Everyone,
Lisa of Lisa's Craft Room here sharing my project with you today.
Thanks Sheila for having me again this month :)
 
I made my mother and sister each a paper cone wreath for a Halloween decoration. These are pretty easy to make but it was my first time making these so please go easy on me. :)  I think they came out cute and they do look better in person, I do need some practice, especially laying them out, I probably could have used more, but both my mother and sister loved them :)
 
Rolling up the papers into cones was a little tricky for me but it wasn't too bad, it's trying to lay them out so that they look nice was a little trying.
On the big wreath, I think the papers are 6 x 6 and on the smaller wreath, the papers are 2 x 2. I used a hot glue gun to adhere them together after I rolled them into the cone shape.
 
The BOO, ghosts and pumpkin are all from My Creative Times stamp set - Treats for my Sweet. I used black and white tulle.
 
I hope you like my project today. Thanks for stopping by, I always appreciate visits and comments.


October 18, 2012

So Boo-tiful

Hi and welcome to She's a Sassy Lady.  I'm Charlotte from A Little Bit Of Detail and I have a little something to share with you.  I have made a Halloween card for my friend, Nancy, who keeps my sweet little Ruby when I travel.  I have three little dogs, Jack, Magnolia and Ruby.  My parents usually keep Jack and Magnolia for me, but my friend Nancy keeps Ruby.  If you visit my blog you can see their photos.  Ruby comes to school with me a good bit and that is where Nancy fell in love with her.  Nancy also works at my school.  Here is Ruby on one of her stays at Nancy's house.  She just gets so spoiled by their whole family.


And now here is the card I have made using the Grand Madison Window die with shutters and a flower box.


All of the papers I used to make the card are from my stash.  i did a little inking to distress the window and shutters.  The pumpkin is a epoxy sticker from Hobby Lobby.  I used two Martha Stewart punches for the leaves.  The ribbon is from Hobby Lobby and the sentiment stamp is from a Scrappy Mom's Stamp set.


I found these adorable moon,star and bat gems at Hobby Lobby and just had to have them.  Aren't they just adorable.  And I think they added the perfect touch to the card.


The bat is just so adorable, and I love that the stars are purple.  



It is always so much fun to be here with The Sassy Lady and all the sassy designers.  I look forward to being back with you.  Have a great day and a Happy Halloween!!

October 17, 2012

Apple Cake in a Jar!

Happy Fall, Y'all!  The post begins with a recipe from my kitchen!
This is Carolyn from Carolyn's Creative Corner and I have a fun post today!  This recipe was taken from the magazine "Mature Living", October 2012 issue, page 32 "Dorothy Rieke's Apple Recipes"
APPLE CAKE IN A JAR
3 cups all-purpose flour                    2 ⅔ cups sugar
1 ½ teaspoons salt                              4 eggs
½ teaspoon baking powder               ⅔ cup water
2 teaspoons baking soda                    3 cups peeled, grated apples
¾ teaspoon ground cinnamon           ⅓ cup chopped dates
⅔ cup shortening                                ⅓ cup raisins             
                                                             ½ cup chopped walnuts
Sterilize 7 or 8 wide-mouth pint jars and lids.  Grease them with shortening.
Preheat oven to 325˚F.  Sift the dry ingredients together in a large bowl.  Set aside.  Mix the shortening, sugar, and eggs together in a large bowl.  Add the dry ingredients alternately with water, mixing well.  Fold in the apples, dates, raisins, and nuts.  Fill the jars about half full.  Clean the tops of jars.  Place the jars on the middle rack of the oven and bake for 40-45 minutes.  When the cake is done, remove the jars from the oven.  Wipe the rims with a clean soft cloth.  Place hot, sterilized lids on the jars.  Add the bands and tighten.  Set aside to cool.  When ready to serve, open the jar, slide out the cake, slice and serve with a sauce such as lemon or butterscotch.  Yield: 7 or 8 cakes 
 
To decorate the jar, I will be using Cricut Cartridge "Doodlecharms", the Gypsy (ProvoCraft hand-held design tool), Cricut Markers, DCWV Chalkboard paper, and the Expression2 Anniversary Edition Electronic Die Cutting Machine.
I am using a 12inch x 12 inch mat to cut the apple image, shadow, and blackout of the apple.
The first step was to draw the images with the Cricut Markers.  I set the speed at 4 and pressure on 3.
When the drawings were complete, I replaced the marker with the blade housing, set the pressure on 5, and pressed 'return to design' button on the Gypsy screen.
The blade moved back to the beginning of the design.  I pressed the 'cut' button and the images were cut on the same lines that were previously drawn.
Three sets of apple images were cut on the 12x12 mat.
I cut 6 sets of apple images and glued each set together as shown.
A hole punch was used to make the hole on the apple tag.
The top of the jar is covered with a cloth circle at 8 ¾ inches in diameter. I cut a paper pattern, then folded the circle in half.  The fabric was folded and the half-circle was placed on the fold.
The fabric was cut into a circle.
To prevent the edges from fraying, I used a Zig glue pen and 'painted' the edges.  The edges of the fabric could be machine/hand stitched, if desired.
To make the placement of the fabric circle even and straight on the lid, I put a large Zot (glue dot) in the center of the lid.
Folded the fabric into quarters with the right side of the fabric together.
Placed a portion of the tip of the fabric on the glue dot.
Spread the fabric circle over the lid, held the fabric in place, and screwed on the ring.
I cut a large piece of sheer ribbon and tied it around the outside of the ring.  Then threaded a shorter piece of ribbon through the apple tag and tied it into the bow.  I used Zots (glue dots) in a couple of places on the ribbon around the ring to help keep it from slipping.
To remove the cake from the jar, slide a dinner knife around the edge of the cake.  Turn the jar upside down and the cake will fall out.  Slice the cake and serve.  It is suggested to add a sauce.  The cake is very moist and tender!
***My husband is a diabetic.  I used 2 cups of 'Stevia in the Raw' instead of sugar.  Stevia is approved for diabetics and does not raise the blood sugar.  Stevia seems to be sweeter than regular sugar, so I decreased the amount of Stevia to 2 cups.***
 
 Thank you for visiting "She's a Sassy Lady" today!
Please come visit me at Carolyn's Creative Corner!
 
 
 
 
 
 
 
 
 
 
   

 

October 16, 2012

Waterfalls and Butterflies

Hi everyone, its Karon from Karon's Krafty Korner and my turn this month to be here to share with you.

I have decided to do a waterfall card, I have been meaning to do one of these ever since I started back into card making earlier in the year.



You will need to start off with an 8.5" by 11" piece of card stock.  Cut this in half, along the long edge, so that you end up with a piece measuring 8.5" by 5.5" and when folded a 5.5" by 4.25" card base.

My first two layers are cut at 5 3/8" by 4 1/8" and 5 2/8" by 4".  You can go ahead and stick these two layers together, do not stick them to you card base yet!


I stamped my four images (from a Recollections stamps set) onto four pieces of white card stock.  Each piece measuring 1 7/8" square.  I used blue ink to stamp the images and ink the edges of all the pieces of card.  Then I backed each of the images with a 2" square, in my yellow card stock.



Now we are going to form the waterfall element of the card.

You will need a piece of card stock 8.5" by 2".  You will score the this piece at the 1.75", 2.5", 3.25" and 4" marks.  (I used yellow for the card)



Before we assemble this next part, you will also need a piece of card stock to use as a band to hold the waterfall in place.  This is to measure 4" by 1".

In order to get the placement of your waterfall band correct, place your waterfall card stock on your card, note the long end when folded (from the 4" fold mark - place this at the top of your top layer) is on the bottom under the band and the shorter at the front of the band.  Lets secure the band with brads, before we continue.


(The base of my band was approximately 1.5" from the bottom.)


Slot the long side of your waterfall behind the band, you only need to secure the front of the waterfall to the front of the band.  Like so.



Next you now need to secure all your images to the folded edges.  Place the images, just under the score marks - this with let your waterfall move easier. Please note after positioning your first image, the rest of the images only need be secured with a little glue.


Now you can add the remaining images, remember secure them just below the the score line.


Now we need to add a little ribbon to the back of the waterfall feature, I used an eyelet to give a little extra strength and then added a little piece of rainbow ribbon.


Now you can secure this to your card base, and we are done.


You can pull the waterfall down using the ribbon.




I also decorated the inside of my card - I really do need to get used to doing this every time, it really finishes the card off.


I hope you have enjoyed this tutorial and were able to follow it:-)  Thanks Sheila for having me again this month.

Happy crafting.

October 15, 2012

Grave Robber

Hi Everyone Beth here from Thunderbirdlindybydesign, It has been a long busy summer, I have finally got a chance to get back into my craft room after several month's enjoying summer.  Thanks Sheila for allowing me to be a guest designer on Shesasassy lady.  I am hoping to be able to post more regular now, and I am keeping my fingers crossed. 

I decided to enter the Movable Monster/Frightful Affair contest on Cricut.com.









I got the idea for this when I was assembling the Movable Skeletons. I put one of their hands up in the air, and thought how fun to have one Skeleton robbing the other 2 in a graveyard. Maybe this is just my warped sense of humor, but I smile everytime I see the skeletons with their hands up in the air.

Anyway here are my instructions.

The Gypsy was used for the entire project.
I also used the following Carts
Movable Monsters
Frightful Affair
Art Deco
October 31
Old West
Ribbons and Rosettes

From the Movable Monsters Cart. I cut 3 skeletons and assembled them. The ribcage from one of the skeletons was 4.069, and I fit the other parts to that cut.
From Art Deco Cut the Hat and Coat sizing it to fit one of the skeletons. Old West was used for the gun cut @ 1.54. The Hearse was cut on a 12x24 mat. Cut 2 layers Black and one layer yellow. Cut several 3.5" x 11 inch strips of black paper and score .25 inches on each long side. Assemble on Black layer and one yellow layer for the hearse and adhere the scored 3.5x11 strips on the inside of the hearse around the edges. Adhere the other Black layer on the back so you create a 3D hearse.The Graveyard in the background is from a frightful affair, cut in a 12x24 mat. The words Grave Robber were cut from A frightful Affair @ 3.5. Cut the shadows also. From Ribbons and Rossette cut the spider Rosette sizing it to 2.5x11.62. You will need 24 of these, 2 for each Rosette. I put an oval frame under each assembled letter. Tomstones, Gargoyle, Fence, cat, moon, bats were cut from October 31. I place everything on the Mantel using strips of paper glued in a triangle shapes to make the Tomstones and the Gargoyles stand up.

Thanks again Sheila, it's good to be back, even if just intermittently.

Beth.